Skip to Content

Wiki source code of Install Docker for Windows

Version 142.1 by Erik Bakker on 2026/01/23 12:50
Hide last authors
eMagiz 1.1 1 {{container}}{{container layoutStyle="columns"}}(((
Erik Bakker 133.1 2 In eMagiz's current runtime architecture, Docker technology is utilized to deploy runtimes efficiently. eMagiz provides specific runtime images that can be deployed within dockerized environments. This section outlines the steps needed to prepare a Windows server for the installation of the eMagiz Deploy Agent, which is responsible for downloading these images from the eMagiz infrastructure.
Erik Bakker 15.1 3
eMagiz 1.1 4 Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
5
6 == 1. Prerequisites ==
7
8 * Advanced knowledge of the eMagiz platform
eMagiz 3.1 9 * Good understanding of eMagiz runtimes in general
eMagiz 1.1 10
11 == 2. Key concepts ==
Erik Bakker 133.1 12 In the current runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
Erik Bakker 95.1 13
14 In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
15
eMagiz 3.1 16 == 3. On-premises deployments ==
eMagiz 25.1 17
18 ===3.1 General requirements===
Erik Bakker 99.1 19
Erik Bakker 142.1 20 {{info}}It is advised to use Docker version 24.0.7 as this is the version being used in the latest eMagiz cloud template. We advise aligning the on-premise Docker version and updating it according to the release notes of the [[Cloud templates>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]].
21 {{/info}}
22
Erik Bakker 99.1 23 {{info}}
24 * Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
25 ** registry.emagiz.com:443
Bas Elzinga 138.2 26 ** controlplane.emagiz.com:443
Erik Bakker 141.1 27 ** controlplane-agent.emagiz.com:443
Bas Elzinga 138.2 28 ** controltower.emagiz.com:443
Erik Bakker 105.1 29 ** controltower.kpn-dsh.com:443
Bas Elzinga 138.2 30 ** controlbus.emagiz.com:443
Erik Bakker 105.1 31 ** Preferably the entry should be *.emagiz.com
Erik Bakker 106.1 32 ** Preferably the entry should be *.kpn-dsh.com{{/info}}
Erik Bakker 99.1 33
etorken 101.1 34 {{warning}}
Erik Bakker 140.1 35 * When using **IP Whitelisting**, the following configuration is needed to communicate to your JMS.
etorken 101.1 36 ** 35.158.46.28:443
37 ** 3.74.190.88:443
38 ** 35.158.46.28:8443
39 ** 3.74.190.88:8443
40 ** 35.158.46.28:8444
Erik Bakker 103.1 41 ** 3.74.190.88:8444
42 ** 3.74.209.20:443
43 ** 3.76.127.155:443
44 ** 3.74.209.20:8443
45 ** 3.76.127.155:8443
46 ** 3.74.209.20:8444
CarlijnKokkeler 134.1 47 ** 3.76.127.155:8444
48 ** 18.199.123.240
49 ** 18.184.211.189
50 ** 3.123.136.31{{/warning}}
Erik Bakker 103.1 51
Erik Bakker 142.1 52
53
Erik Bakker 95.1 54 ===3.2 Installation Windows===
Erik Bakker 142.1 55 When Windows is selected as the operating system, you need Windows Server 2022. Older Windows servers are **not** supported.
eMagiz 1.1 56
Erik Bakker 95.1 57 ==== 3.2.1 Docker Installation ====
Erik Bakker 142.1 58 To install Docker on your machine, execute the following commands in PowerShell with administrative rights:
eMagiz 18.1 59
eMagiz 42.1 60 {{code language="cmd"}}
CarlijnKokkeler 126.1 61 Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Install-update-docker/install-update-docker.ps1" -o install-update-docker-ce.ps1
62 .\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
eMagiz 43.1 63 {{/code}}
eMagiz 44.1 64
Erik Bakker 135.1 65 ==== 3.2.2 Customization ====
CarlijnKokkeler 122.1 66
Erik Bakker 142.1 67 After installing Docker, you can stick with the standard configuration or adjust specific settings. Settings that can be of particular interest include the one that defines the IP address range your Docker installation will use to run containers, and the one that defines where to store data (i.e., containers and images). To check the full list of compatible configuration options for Windows, you can check: [[Configure Docker in Windows>>https://learn.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon||target="blank"]].
Erik Bakker 136.1 68
Erik Bakker 137.1 69 {{warning}}Be aware that the customization will only take effect once you have restarted the machine.{{/warning}}
CarlijnKokkeler 125.1 70
Erik Bakker 135.1 71 ===== 3.2.2.1 IP address range =====
72
Erik Bakker 142.1 73 Below is the code needed to configure a different IP address range.
CarlijnKokkeler 125.1 74
75 {{code language="cmd"}}
Erik Bakker 137.1 76 cd C:\ProgramData\Docker\config\daemon.json
Erik Bakker 142.1 77 #Add the following lines
Erik Bakker 137.1 78 {"fixed-cidr": "<ip-address>"}
Erik Bakker 135.1 79 {{/code}}
Erik Bakker 138.1 80
Erik Bakker 135.1 81 ===== 3.2.2.2 Data location =====
82
Erik Bakker 142.1 83 Below is an example of switching from the default C directory ({{code language="cmd"}}c:\programdata\docker{{/code}}) to the D directory to store Docker data. Based on your internal configuration, you can choose the best suitable variant if needed. To do so, you can add the following attribute to the Docker daemon file:
Erik Bakker 135.1 84
85 {{code language="cmd"}}
Erik Bakker 137.1 86 cd C:\ProgramData\Docker\config\daemon.json
Erik Bakker 142.1 87 #Add the following lines
CarlijnKokkeler 125.1 88 {
89 "data-root": "d:\\docker"
90 }
91 {{/code}}
Erik Bakker 138.1 92
Erik Bakker 142.1 93 {{warning}}Note that when you want to create multiple customizations to your configuration, the result in the daemon.json file should be a **valid** JSON structure{{/warning}}
CarlijnKokkeler 125.1 94
Erik Bakker 135.1 95 ==== 3.2.3 Check installation ====
CarlijnKokkeler 125.1 96
Erik Bakker 95.1 97 After executing the commands above, the server will restart if required. After the restart, execute the following command
eMagiz 44.1 98
eMagiz 45.1 99 {{code language="cmd"}}
Erik Bakker 95.1 100 docker ps
eMagiz 62.1 101 {{/code}}
102
Erik Bakker 142.1 103 If the command returns "command not found," please run the following command again.
eMagiz 72.1 104
105 {{code language="cmd"}}
Erik Bakker 127.1 106 .\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
eMagiz 47.1 107 {{/code}}
eMagiz 24.1 108
Erik Bakker 142.1 109 ==== 3.2.3 Verify Docker functionality ====
eMagiz 45.1 110
Erik Bakker 95.1 111 Execute the following command
eMagiz 50.1 112
eMagiz 49.1 113 {{code language="cmd"}}
Erik Bakker 95.1 114 docker ps
eMagiz 49.1 115 {{/code}}
eMagiz 32.1 116
Erik Bakker 95.1 117 The result of this call should show the following:
eMagiz 51.1 118
Erik Bakker 97.1 119 [[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
eMagiz 52.1 120
Erik Bakker 95.1 121 ==== 3.2.4 Install eMagiz Deploy Agent ====
eMagiz 52.1 122
Erik Bakker 142.1 123 Install the eMagiz Deploy agent as described in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
eMagiz 52.1 124
Erik Bakker 142.1 125 ==== 3.3 Update Docker ====
126 When you are advised to update your Docker version, you can verify whether you are on the correct Docker version by executing the following command in PowerShell with administrative rights:
CarlijnKokkeler 115.1 127
128 {{code language="cmd"}}
Erik Bakker 142.1 129 docker version
130 {{/code}}
131
132 When this returns a version **lower** than the advised version shown below, you can update Docker on your machine. To do so, execute the following command in PowerShell with administrative rights:
133
134 {{code language="cmd"}}
135 .\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
136 {{/code}}
137
138 ===3.4 Uninstall Docker===
139 To uninstall Docker from your machine, execute the following commands in PowerShell with administrative rights:
140
141 {{code language="cmd"}}
CarlijnKokkeler 115.1 142 Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Uninstall-docker/uninstall-docker.ps1" -o uninstall-docker-ce.ps1
143 {{/code}}
144
145 Example usage:
146
147 {{code language="cmd"}}
148 .\uninstall-docker-ce.ps1
149 {{/code}}
150
Erik Bakker 91.1 151 == 4. Key takeaways ==
eMagiz 1.1 152
Erik Bakker 142.1 153 * eMagiz uses runtime images to deploy the eMagiz runtime on Dockerized environments. The runtime image holds all the information and components required to run the runtime
eMagiz 5.1 154 * eMagiz has a specific agent that manages the download of that image to the on-premises server
Erik Bakker 142.1 155 * The firewall of the on-premises environment should allow outgoing traffic without any restrictions. If that is not desirable, eMagiz can provide the addresses and ports needed to set up the appropriate firewall rules.
eMagiz 1.1 156
Erik Bakker 91.1 157 == 5. Suggested Additional Readings ==
eMagiz 1.1 158
Erik Bakker 133.1 159 * [[Fundamentals (Navigation)>>doc:Main.eMagiz Academy.Fundamentals.WebHome||target="blank"]]
160 ** [[eMagiz Runtime Generation 3 (Explanation)>>doc:Main.eMagiz Academy.Fundamentals.fundamental-runtime-generation3||target="blank"]]
CarlijnKokkeler 129.1 161 * [[Release Information (Menu)>>doc:Main.Release Information.WebHome||target="blank"]]
162 ** [[Environment Templates (Navigation)>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]]
CarlijnKokkeler 128.1 163 * [[Intermediate (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.WebHome||target="blank"]]
164 ** [[eMagiz Runtime Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.WebHome||target="blank"]]
165 *** [[Interpret on-premise logging (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-emagiz-runtime-management-interpret-on-premise-logging.WebHome||target="blank"]]
CarlijnKokkeler 129.1 166 *** [[eMagiz Deploy agent (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
CarlijnKokkeler 128.1 167 * [[Advanced (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.WebHome||target="blank"]]
168 ** [[Lifecycle Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.WebHome||target="blank"]]
169 *** [[Impact of Runtime Image Upgrades (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.advanced-lifecycle-management-impact-of-runtime-image-upgrades.WebHome||target="blank"]]
170 * [[Expert (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.WebHome||target="blank"]]
171 ** [[Solution Architecture (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.WebHome||target="blank"]]
172 *** [[Install Docker for Linux (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-onpremises-server-linux-installguide.WebHome||target="blank"]]
CarlijnKokkeler 131.1 173 * [[Install Docker (Search Result)>>url:https://docs.emagiz.com/bin/view/Main/Search?sort=score&sortOrder=desc&highlight=true&facet=true&r=1&f_space_facet=0%2FMain.&f_type=DOCUMENT&f_locale=en&f_locale=&f_locale=en&text=install+docker||target="blank"]]
CarlijnKokkeler 129.1 174 * Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
CarlijnKokkeler 131.1 175
eMagiz 1.1 176 )))((({{toc/}}))){{/container}}{{/container}}