Changes for page Install Docker for Windows

Last modified by Erik Bakker on 2026/01/30 10:56

From 52.1 to 53.1 From 140.1 to 141.1

From version 53.1

edited by eMagiz
on 2023/02/07 11:29

Change comment: There is no comment for this version

To version 140.1

edited by Erik Bakker
on 2025/04/18 13:54

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--On-premise Install Guide
++Install Docker for Windows

Author

@@ -1,1 +1,1 @@
--XWiki.eMagiz
++XWiki.ebakker

Content

@@ -1,5 +1,5 @@
  {{container}}{{container layoutStyle="columns"}}(((
--In this microlearning, we will focus on how the installation requirements for on-premises deployments of eMagiz runtimes that are part of the new runtime architecture. The new runtime architecture uses a containerized approach to deploy runtimes.
++In eMagiz's current runtime architecture, Docker technology is utilized to deploy runtimes efficiently. eMagiz provides specific runtime images that can be deployed within dockerized environments. This section outlines the steps needed to prepare a Windows server for the installation of the eMagiz Deploy Agent, which is responsible for downloading these images from the eMagiz infrastructure.
  Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
@@ -9,190 +9,155 @@
  * Good understanding of eMagiz runtimes in general
  == 2. Key concepts ==
--In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
--
--In the below section the specific operating systems and versions are discussed in a sense that the prerequisite installations are described. Once the right installation is done, refer to section 3.7 for the installation of the eMagiz agent that manages the interaction with the eMagiz platform. That agent will download the created docker images that will be deployed in the Docker environment.
--
++In the current runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
++
++In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
++
  == 3. On-premises deployments ==
  ===3.1 General requirements===
--
--These are the general requirements to allow the installation of the eMagiz Docker agent:
--* Ensure access to the following URLs is enabled
--    ** registry.emagiz.com:8443
++
++{{info}}
++* Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
++    ** registry.emagiz.com:443
++    ** controlplane.emagiz.com:443
      ** controlplane.emagiz.com:8000
++    ** controlplane-agent.emagiz.com:8000
++    ** controltower.emagiz.com:443
++    ** controltower.kpn-dsh.com:443
++    ** controlbus.emagiz.com:443
      ** Preferably the entry should be *.emagiz.com
++    ** Preferably the entry should be *.kpn-dsh.com{{/info}}
--
--===3.2 Installation requirements Linux===
++{{warning}}
++* When using **IP Whitelisting**, the following configuration is needed to communicate to your JMS.
++    ** 35.158.46.28:443
++    ** 3.74.190.88:443
++    ** 35.158.46.28:8443
++    ** 3.74.190.88:8443
++    ** 35.158.46.28:8444
++    ** 3.74.190.88:8444
++    ** 3.74.209.20:443
++    ** 3.76.127.155:443
++    ** 3.74.209.20:8443
++    ** 3.76.127.155:8443
++    ** 3.74.209.20:8444
++    ** 3.76.127.155:8444
++    ** 18.199.123.240
++    ** 18.184.211.189
++    ** 3.123.136.31{{/warning}}
--* Whenever Linux is selected as operating system, the latest version of Ubuntu will work
--* Install latest version of the Docker engine - see for instance {{code}}https://docs.docker.com/engine/install/ubuntu/{{/code}}
--* Go to the next section around installing the eMagiz agent
++===3.2 Installation Windows===
++Whenever Windows is selected as operating system, you need to have a Windows Server 2022 version. Older Windows servers are **not** supported.
--===3.3 Installation requirements Windows Server 2022===
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install latest version of Docker Desktop from  {{code}}https://www.docker.com/products/docker-desktop/{{/code}}
--* Validate if WSL 2.0 is properly installed
--* Go to the next section around installing the eMagiz Docker agent
++==== 3.2.1 Docker Installation ====
++To install or update docker on your machine, execute the following commands in powershell with administrative rights:
--===3.3 Installation requirements Windows Server 2022 (without Docker Desktop) ===
--
--**Step 1: Install linux distribution**
--
  {{code language="cmd"}}
--  wsl --install -d Ubuntu
--  sudo apt-get update
--  sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
--  . /etc/os-release
++Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Install-update-docker/install-update-docker.ps1" -o install-update-docker-ce.ps1
++.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
  {{/code}}
++{{info}}It is advised to use Docker version 24.0.7 as this is the version being used in the latest eMagiz cloud template. We advise to align the on-premise Docker version and update it according to the release notes of the [[Cloud templates>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]].
++{{/info}}
--**Step 2: Install Docker **
++==== 3.2.2 Customization ====
--{{code language="cmd"}}
--  curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
--  echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
--  sudo apt update
--  sudo apt install docker-ce docker-ce-cli containerd.io
--{{/code}}
++After installing Docker you have the option to stick with the standard configuration of Docker or you can opt to alter some specific settings. Settings that can be of particular interest are the setting that defines the IP address range your Docker installation will use to run the containers and the setting that defines where to store data (i.e. containers and images). To check the full list of compatible configuration options for Windows you can check: [[Configure Docker in Windows>>https://learn.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon||target="blank"]].
--{{info}}
-- Requires ~335 Mb space to install
--{{/info}}
++{{warning}}Be aware that the customization will only take effect once you have restarted the machine.{{/warning}}
--**Step 3: Install Java **
++===== 3.2.2.1 IP address range =====
++
++Below you can find the code necessary to configure a different IP address range.
  {{code language="cmd"}}
--  wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
--  echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
--  sudo apt update # update if you haven't already
--  sudo apt install temurin-8-jdk
++cd C:\ProgramData\Docker\config\daemon.json
++#Add following lines
++{"fixed-cidr": "<ip-address>"}
  {{/code}}
--{{info}}
-- Requires ~335 Mb space to install
--{{/info}}
++===== 3.2.2.2 Data location =====
++
++Below you can find an example of switching from the default C directory ({{code language="cmd"}}c:\programdata\docker{{/code}}) to the D directory to store data related to Docker. Based on your internal configuration you can choose the best suitable variant if that is needed. To do so you can add the following attribute to the Docker daemon file:
--**Step 4: Ensure Docker is autostarted with WSL **
--
  {{code language="cmd"}}
--nano .bashrc
--
--  #Add following lines to bashrc
--	DOCKER_DISTRO="Ubuntu"
--	DOCKER_LOG_DIR=$HOME/docker_logs
--	mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
--	/mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
++cd C:\ProgramData\Docker\config\daemon.json
++#Add following lines
++{
++ "data-root": "d:\\docker"
++}
  {{/code}}
--**Step 5: Add user to Docker group **
++{{warning}}Note that when you want to create multiple customizations to your configuration the result in the daemon.json file should be a **valid** JSON structure{{/warning}}
--{{code language="cmd"}}
--sudo visudo
++==== 3.2.3 Check installation ====
--  #Add following lines
++After executing the commands above, the server will restart if required. After the restart, execute the following command
--  # Don't ask for password
--  %docker ALL=(ALL)  NOPASSWD: /usr/bin/dockerd
++{{code language="cmd"}}
++docker ps
  {{/code}}
--**Step 6: Update wsl config file **
++If the command returns that the command cannot be found, please run the following command again.
  {{code language="cmd"}}
--  #Add following lines
-- #Set WSL config for memory
--  USERDIR/.wslconfig
--  # Settings apply across all Linux distros running on WSL 2
--  [wsl2]
--  # Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
--  memory=16GB
--  # Sets the VM to use two virtual processors
--  processors=2
--{{/code}}
--
++.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
++{{/code}}
++==== 3.2.3 Verify docker functionality ====
--(Exit WSL: wsl --shutdown)
--
++Execute the following command
--===3.4 Installation requirements Windows Server 2019 version >1806===
++{{code language="cmd"}}
++docker ps
++{{/code}}
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install latest version of Docker Desktop from  https://www.docker.com/products/docker-desktop/
--* Validate if WSL 2.0 is properly installed
--* Go to the next section around installing the eMagiz Docker agent
++The result of this call should show the following:
--===3.5 Installation requirements Windows Server 2019 version 1806===
++[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Enable Hyper-V in Windows Server
--  ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
--  ** Restart windows
--* Cross check is WSL 2.0 is installed
--  ** Use this command to get WSL 2.0: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
--* Install Docker Desktop on the Windows Server
--  ** Please refer to this link: https://www.docker.com/products/docker-desktop/
--  ** Restart windows
--* Update Docker Desktop configuration
--  ** Go to settings, and enable ‘Expose daemon on tcp://localhost:2375’ without TLS
--  ** Restart Docker
--* Open Powershell as Administrator
--  ** Execute "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
--  ** Execute Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
--  ** Execute curl.exe -L -o ubuntu-2004.appx https://aka.ms/wslubuntu2004
--  ** Execute Add-AppxPackage .\ubuntu-2004.appx
--    *** If errors occur, please consult https://learn.microsoft.com/en-us/windows/wsl/install-on-server. Rename the file to a zip, expand it, and add it to the path variable.
--* Ubuntu should now be a runnable program (press windows key, type ubuntu)
--* Open the ubuntu terminal, and finish the installation.
--  ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
--* Go to the next section around installing the eMagiz Docker agent
++==== 3.2.4 Install eMagiz Deploy Agent ====
--===3.6 Installation requirements Windows Server 2012 R2 ===
++Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install & enable Hyper-V in Windows Server
--  ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
--  ** Restart windows
--* Download a ubuntu server 18.04 (https://releases.ubuntu.com/18.04/ubuntu-18.04.6-live-server-amd64.iso )
--* Create a VM in HyperV.
--  ** For this, choose Generation 1, the amount of memory you want to assign to ubuntu and thus to the containers. Please consider the overhead for memory as well (such as OS).
--  ** Configure a virtual switch.
--  ** Add a virtual Hard Disk with proper sizing (e.g. 30 GB)
--  ** Install an operating system from bootable CD/DVD, ISO file
--* Install ubuntu downloaded previously on the VM
--* Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
--* Go to the next section around installing the eMagiz agent
++===3.3 Uninstall Docker===
++To uninstall docker from your machine, execute the following commands in powershell with administrative rights:
--=== 3.7 eMagiz Docker agent installation ===
++{{code language="cmd"}}
++Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Uninstall-docker/uninstall-docker.ps1" -o uninstall-docker-ce.ps1
++{{/code}}
--eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal under Deploy Architecture. At the runtime connector, there is a right click option called Deploy Agent. That presents either the command or the location where that agent is installed.
++Example usage:
--[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-installguide-deployagent.png]]
++{{code language="cmd"}}
++.\uninstall-docker-ce.ps1
++{{/code}}
--After installing the agent, you can use the Docker cheat sheet below to see if the docker containers are running and/or images are available.
++== 4. Key takeaways ==
--== 4. Assignment ==
--
--Check out the cheatcheet for Docker command line:
--
--[[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
--
--== 5. Key takeaways ==
--
  * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
  * eMagiz has a specific agent that manages the download of that image to the on-premises server
  * The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
++== 5. Suggested Additional Readings ==
++* [[Fundamentals (Navigation)>>doc:Main.eMagiz Academy.Fundamentals.WebHome||target="blank"]]
++** [[eMagiz Runtime Generation 3 (Explanation)>>doc:Main.eMagiz Academy.Fundamentals.fundamental-runtime-generation3||target="blank"]]
++* [[Release Information (Menu)>>doc:Main.Release Information.WebHome||target="blank"]]
++** [[Environment Templates (Navigation)>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]]
++* [[Intermediate (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.WebHome||target="blank"]]
++** [[eMagiz Runtime Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.WebHome||target="blank"]]
++*** [[Interpret on-premise logging (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-emagiz-runtime-management-interpret-on-premise-logging.WebHome||target="blank"]]
++*** [[eMagiz Deploy agent (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
++* [[Advanced (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.WebHome||target="blank"]]
++** [[Lifecycle Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.WebHome||target="blank"]]
++*** [[Impact of Runtime Image Upgrades (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.advanced-lifecycle-management-impact-of-runtime-image-upgrades.WebHome||target="blank"]]
++* [[Expert (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.WebHome||target="blank"]]
++** [[Solution Architecture (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.WebHome||target="blank"]]
++*** [[Install Docker for Linux (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-onpremises-server-linux-installguide.WebHome||target="blank"]]
++* [[Install Docker (Search Result)>>url:https://docs.emagiz.com/bin/view/Main/Search?sort=score&sortOrder=desc&highlight=true&facet=true&r=1&f_space_facet=0%2FMain.&f_type=DOCUMENT&f_locale=en&f_locale=&f_locale=en&text=install+docker||target="blank"]]
++* Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
--== 6. Suggested Additional Readings ==
--
--N/A
--
--== 7. Silent demonstration video ==
--
--N/A
--
  )))((({{toc/}}))){{/container}}{{/container}}