Changes for page Install Docker for Windows

Last modified by Erik Bakker on 2026/01/30 10:56

From 42.1 to 43.1 From 139.1 to 140.1

From version 43.1

edited by eMagiz
on 2023/01/26 08:57

Change comment: There is no comment for this version

To version 139.1

edited by Bas Elzinga
on 2024/12/17 12:20

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (3 modified, 0 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--On-premise Install Guide
++Install Docker for Windows

Author

@@ -1,1 +1,1 @@
--XWiki.eMagiz
++XWiki.BasElzinga

Content

@@ -1,5 +1,5 @@
  {{container}}{{container layoutStyle="columns"}}(((
--In this microlearning, we will focus on how the installation requirements for on-premises deployments of eMagiz runtimes that are part of the new runtime architecture. The new runtime architecture uses a containerized approach to deploy runtimes.
++In eMagiz's current runtime architecture, Docker technology is utilized to deploy runtimes efficiently. eMagiz provides specific runtime images that can be deployed within dockerized environments. This section outlines the steps needed to prepare a Windows server for the installation of the eMagiz Deploy Agent, which is responsible for downloading these images from the eMagiz infrastructure.
  Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
@@ -9,158 +9,160 @@
  * Good understanding of eMagiz runtimes in general
  == 2. Key concepts ==
--In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
--
--In the below section the specific operating systems and versions are discussed in a sense that the prerequisite installations are described. Once the right installation is done, refer to section 3.7 for the installation of the eMagiz agent that manages the interaction with the eMagiz platform. That agent will download the created docker images that will be deployed in the Docker environment.
--
++In the current runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
++
++In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
++
  == 3. On-premises deployments ==
  ===3.1 General requirements===
--
--These are the general requirements to allow the installation of the eMagiz Docker agent:
--* Ensure access to the following URLs is enabled
--    ** registry.emagiz.com:8443
++
++{{info}}
++* Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
++    ** registry.emagiz.com:443
++    ** controlplane.emagiz.com:443
      ** controlplane.emagiz.com:8000
++    ** controlplane-agent.emagiz.com:8000
++    ** controltower.emagiz.com:443
++    ** controltower.kpn-dsh.com:443
++    ** controlbus.emagiz.com:443
      ** Preferably the entry should be *.emagiz.com
++    ** Preferably the entry should be *.kpn-dsh.com{{/info}}
--
--===3.2 Installation requirements Linux===
++{{warning}}
++* When using cloudslot number **equal to or below** 125, the following configuration is needed to communicate to your JMS.
++    ** 35.158.46.28:443
++    ** 3.74.190.88:443
++    ** 35.158.46.28:8443
++    ** 3.74.190.88:8443
++    ** 35.158.46.28:8444
++    ** 3.74.190.88:8444
++    ** 18.199.123.240
++    ** 18.184.211.189
++    ** 3.123.136.31
--* Whenever Linux is selected as operating system, the latest version of Ubuntu will work
--* Install latest version of the Docker engine - see for instance {{code}}https://docs.docker.com/engine/install/ubuntu/{{/code}}
--* Go to the next section around installing the eMagiz agent
++* When using a cloudslot number **above** 125, the following configuration is needed to communicate to your JMS.
++    ** 3.74.209.20:443
++    ** 3.76.127.155:443
++    ** 3.74.209.20:8443
++    ** 3.76.127.155:8443
++    ** 3.74.209.20:8444
++    ** 3.76.127.155:8444
++    ** 18.199.123.240
++    ** 18.184.211.189
++    ** 3.123.136.31{{/warning}}
--===3.3 Installation requirements Windows Server 2022===
++===3.2 Installation Windows===
++Whenever Windows is selected as operating system, you need to have a Windows Server 2022 version. Older Windows servers are **not** supported.
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install latest version of Docker Desktop from  {{code}}https://www.docker.com/products/docker-desktop/{{/code}}
--* Validate if WSL 2.0 is properly installed
--* Go to the next section around installing the eMagiz Docker agent
--Step 1: Install linux distribution
++==== 3.2.1 Docker Installation ====
++To install or update docker on your machine, execute the following commands in powershell with administrative rights:
++
  {{code language="cmd"}}
--wsl --install -d Ubuntu
++Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Install-update-docker/install-update-docker.ps1" -o install-update-docker-ce.ps1
++.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
  {{/code}}
--
--  #Install docker
--sudo apt-get update
--sudo apt install --no-install-recommends apt-transport-https ca-certificates curl gnupg2
--. /etc/os-release
--curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo tee /etc/apt/trusted.gpg.d/docker.asc
--echo "deb [arch=amd64] https://download.docker.com/linux/${ID} ${VERSION_CODENAME} stable" | sudo tee /etc/apt/sources.list.d/docker.list
--sudo apt update
--sudo apt install docker-ce docker-ce-cli containerd.io
--#Install Java
--wget -O - https://packages.adoptium.net/artifactory/api/gpg/key/public | sudo apt-key add -
--echo "deb https://packages.adoptium.net/artifactory/deb $(awk -F= '/^VERSION_CODENAME/{print$2}' /etc/os-release) main" | sudo tee /etc/apt/sources.list.d/adoptium.list
--sudo apt update # update if you haven't already
--sudo apt install temurin-8-jdk
++{{info}}It is advised to use Docker version 24.0.7 as this is the version being used in the latest eMagiz cloud template. We advise to align the on-premise Docker version and update it according to the release notes of the [[Cloud templates>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]].
++{{/info}}
--#Autostart Dockerd with wsl
++==== 3.2.2 Customization ====
--nano .bashrc
++After installing Docker you have the option to stick with the standard configuration of Docker or you can opt to alter some specific settings. Settings that can be of particular interest are the setting that defines the IP address range your Docker installation will use to run the containers and the setting that defines where to store data (i.e. containers and images). To check the full list of compatible configuration options for Windows you can check: [[Configure Docker in Windows>>https://learn.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon||target="blank"]].
--	DOCKER_DISTRO="Ubuntu"
--	DOCKER_LOG_DIR=$HOME/docker_logs
--	mkdir -pm o=,ug=rwx "$DOCKER_LOG_DIR"
--	/mnt/c/Windows/System32/wsl.exe -d $DOCKER_DISTRO sh -c "nohup sudo -b dockerd < /dev/null > $DOCKER_LOG_DIR/dockerd.log 2>&1"
++{{warning}}Be aware that the customization will only take effect once you have restarted the machine.{{/warning}}
--#Do not ask password dockerd
--sudo visudo
++===== 3.2.2.1 IP address range =====
++
++Below you can find the code necessary to configure a different IP address range.
--	%docker ALL=(ALL)  NOPASSWD: /usr/bin/dockerd
++{{code language="cmd"}}
++cd C:\ProgramData\Docker\config\daemon.json
++#Add following lines
++{"fixed-cidr": "<ip-address>"}
++{{/code}}
--#Set WSL config for memory
--USERDIR/.wslconfig
--	# Settings apply across all Linux distros running on WSL 2
--	[wsl2]
++===== 3.2.2.2 Data location =====
++
++Below you can find an example of switching from the default C directory ({{code language="cmd"}}c:\programdata\docker{{/code}}) to the D directory to store data related to Docker. Based on your internal configuration you can choose the best suitable variant if that is needed. To do so you can add the following attribute to the Docker daemon file:
--	# Limits VM memory to use no more than 4 GB, this can be set as whole numbers using GB or MB
--	memory=16GB
++{{code language="cmd"}}
++cd C:\ProgramData\Docker\config\daemon.json
++#Add following lines
++{
++ "data-root": "d:\\docker"
++}
++{{/code}}
--	# Sets the VM to use two virtual processors
--	processors=2
++{{warning}}Note that when you want to create multiple customizations to your configuration the result in the daemon.json file should be a **valid** JSON structure{{/warning}}
--(Exit WSL: wsl --shutdown)
--    {{/code}}
++==== 3.2.3 Check installation ====
--===3.4 Installation requirements Windows Server 2019 version >1806===
++After executing the commands above, the server will restart if required. After the restart, execute the following command
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install latest version of Docker Desktop from  https://www.docker.com/products/docker-desktop/
--* Validate if WSL 2.0 is properly installed
--* Go to the next section around installing the eMagiz Docker agent
++{{code language="cmd"}}
++docker ps
++{{/code}}
--===3.5 Installation requirements Windows Server 2019 version 1806===
++If the command returns that the command cannot be found, please run the following command again.
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Enable Hyper-V in Windows Server
--  ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
--  ** Restart windows
--* Cross check is WSL 2.0 is installed
--  ** Use this command to get WSL 2.0: Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
--* Install Docker Desktop on the Windows Server
--  ** Please refer to this link: https://www.docker.com/products/docker-desktop/
--  ** Restart windows
--* Update Docker Desktop configuration
--  ** Go to settings, and enable ‘Expose daemon on tcp://localhost:2375’ without TLS
--  ** Restart Docker
--* Open Powershell as Administrator
--  ** Execute "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
--  ** Execute Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
--  ** Execute curl.exe -L -o ubuntu-2004.appx https://aka.ms/wslubuntu2004
--  ** Execute Add-AppxPackage .\ubuntu-2004.appx
--    *** If errors occur, please consult https://learn.microsoft.com/en-us/windows/wsl/install-on-server. Rename the file to a zip, expand it, and add it to the path variable.
--* Ubuntu should now be a runnable program (press windows key, type ubuntu)
--* Open the ubuntu terminal, and finish the installation.
--  ** After installation, execute: export DOCKER_HOST=tcp://localhost:2375
--* Go to the next section around installing the eMagiz Docker agent
++{{code language="cmd"}}
++.\install-update-docker-ce.ps1 -DockerVersion DESIRED_VERSION
++{{/code}}
--===3.6 Installation requirements Windows Server 2012 R2 ===
++==== 3.2.3 Verify docker functionality ====
--These are the requirements to allow the installation of the eMagiz Docker agent:
--* Install & enable Hyper-V in Windows Server
--  ** Go to Server Manager, Manage (top right), enable roles and features, select the desired roles and server selections. In the Features section, enable Hyper-V.
--  ** Restart windows
--* Download a ubuntu server 18.04 (https://releases.ubuntu.com/18.04/ubuntu-18.04.6-live-server-amd64.iso )
--* Create a VM in HyperV.
--  ** For this, choose Generation 1, the amount of memory you want to assign to ubuntu and thus to the containers. Please consider the overhead for memory as well (such as OS).
--  ** Configure a virtual switch.
--  ** Add a virtual Hard Disk with proper sizing (e.g. 30 GB)
--  ** Install an operating system from bootable CD/DVD, ISO file
--* Install ubuntu downloaded previously on the VM
--* Install docker as per official ubuntu documentation (See https://docs.docker.com/engine/install/ubuntu/#install-using-the-repository) on the VM
--* Go to the next section around installing the eMagiz agent
++Execute the following command
--=== 3.7 eMagiz Docker agent installation ===
++{{code language="cmd"}}
++docker ps
++{{/code}}
--eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal under Deploy Architecture. At the runtime connector, there is a right click option called Deploy Agent. That presents either the command or the location where that agent is installed.
++The result of this call should show the following:
--[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-installguide-deployagent.png]]
++[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
--After installing the agent, you can use the Docker cheat sheet below to see if the docker containers are running and/or images are available.
++==== 3.2.4 Install eMagiz Deploy Agent ====
--== 4. Assignment ==
++Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
--Check out the cheatcheet for Docker command line:
++===3.3 Uninstall Docker===
++To uninstall docker from your machine, execute the following commands in powershell with administrative rights:
--[[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
++{{code language="cmd"}}
++Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/emagiz/windows-support/main/Uninstall-docker/uninstall-docker.ps1" -o uninstall-docker-ce.ps1
++{{/code}}
--== 5. Key takeaways ==
++Example usage:
++{{code language="cmd"}}
++.\uninstall-docker-ce.ps1
++{{/code}}
++
++== 4. Key takeaways ==
++
  * eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
  * eMagiz has a specific agent that manages the download of that image to the on-premises server
  * The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
++== 5. Suggested Additional Readings ==
++* [[Fundamentals (Navigation)>>doc:Main.eMagiz Academy.Fundamentals.WebHome||target="blank"]]
++** [[eMagiz Runtime Generation 3 (Explanation)>>doc:Main.eMagiz Academy.Fundamentals.fundamental-runtime-generation3||target="blank"]]
++* [[Release Information (Menu)>>doc:Main.Release Information.WebHome||target="blank"]]
++** [[Environment Templates (Navigation)>>doc:Main.Release Information.Cloud Templates.WebHome||target="blank"]]
++* [[Intermediate (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.WebHome||target="blank"]]
++** [[eMagiz Runtime Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.WebHome||target="blank"]]
++*** [[Interpret on-premise logging (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-emagiz-runtime-management-interpret-on-premise-logging.WebHome||target="blank"]]
++*** [[eMagiz Deploy agent (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
++* [[Advanced (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.WebHome||target="blank"]]
++** [[Lifecycle Management (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.WebHome||target="blank"]]
++*** [[Impact of Runtime Image Upgrades (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Advanced Level.Lifecycle Management.advanced-lifecycle-management-impact-of-runtime-image-upgrades.WebHome||target="blank"]]
++* [[Expert (Menu)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.WebHome||target="blank"]]
++** [[Solution Architecture (Navigation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.WebHome||target="blank"]]
++*** [[Install Docker for Linux (Explanation)>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-onpremises-server-linux-installguide.WebHome||target="blank"]]
++* [[Install Docker (Search Result)>>url:https://docs.emagiz.com/bin/view/Main/Search?sort=score&sortOrder=desc&highlight=true&facet=true&r=1&f_space_facet=0%2FMain.&f_type=DOCUMENT&f_locale=en&f_locale=&f_locale=en&text=install+docker||target="blank"]]
++* Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
--== 6. Suggested Additional Readings ==
--
--N/A
--
--== 7. Silent demonstration video ==
--
--N/A
--
  )))((({{toc/}}))){{/container}}{{/container}}