Skip to Content
Last modified by Erik Bakker on 2026/01/30 10:56
From version 11.1
edited by eMagiz
on 2022/10/19 08:46
Change comment: There is no comment for this version
To version 100.1
edited by Erik Bakker
on 2024/02/27 09:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -On-premises deployment new runtime architecture
1 +Install Docker for Windows
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.eMagiz
1 +XWiki.ebakker
Content
... ... @@ -1,11 +1,8 @@
1 1  {{container}}{{container layoutStyle="columns"}}(((
2 -In this microlearning, we will focus on how the installation requirements for on-premises deployments of eMagiz runtimes that are part of the new runtime architecture. The new runtime architecture uses a containerized approach to deploy runtimes.
3 -
2 +In this microlearning, we will focus on how an on-premises server can be prepared for a eMagiz Deploy agent installation.
3 +
4 4  Should you have any questions, please contact [[academy@emagiz.com>>mailto:academy@emagiz.com]].
5 5  
6 -* Last update: June 24th 2021
7 -* Required reading time: 10 minutes
8 -
9 9  == 1. Prerequisites ==
10 10  
11 11  * Advanced knowledge of the eMagiz platform
... ... @@ -12,54 +12,70 @@
12 12  * Good understanding of eMagiz runtimes in general
13 13  
14 14  == 2. Key concepts ==
15 -In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized envirionments
16 -
12 +In the new runtime architecture of eMagiz, Docker technology is used to deploy runtimes. eMagiz creates specific runtime images that contain the eMagiz runtime, and can be deployed in dockerized environments.
13 +
14 +In the below section the Windows variant is described in terms of how to prepare the server to allow the [[eMagiz Deploy Agent>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]] to be installed. That agent allows to download images from the eMagiz infrastructure.
15 +
17 17  == 3. On-premises deployments ==
18 18  
19 -===3.1 Installation requirements===
20 -Below the list of requirements for an on-premises deployment
18 +===3.1 General requirements===
21 21  
22 -* Windows Server or Linux Server
23 - ** Windows Server requires installation of the Linux subsystem for Windows. Please refer to this link: https://learn.microsoft.com/en-us/windows/wsl/install-on-server
24 -* Installed Docker software - latest version
25 -* Optional: Install Docker Desktop for Windows
26 - ** See also [[Install guide Docker>>https://docs.docker.com/desktop/install/windows-install/]]
27 -* Docker software installed requires use of the LinuxEngine (valid for Windows based Docker engine installations)
28 - ** Use command line option to switch to the option"C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchLinuxEngine
29 -* Server connected to the internet whereby the firewall doesn't prevent data traffic going outwards to the Internet
30 - ** In case there are outgoing firewall rules, the following URLs need to be made available
31 - *** https://testing.emagiz.com
32 - *** https://registry.emagiz.com
33 -* Sufficient resources in line with the requirements of the eMagiz runtimes. See this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Expert Level.Solution Architecture.expert-solution-architecture-determining-needed-memory.WebHome||target="blank"]]
34 -
35 -=== 3.2 Installation agent ===
36 -
37 -eMagiz needs to install a specific agent in the Docker instance that allows to download runtime images that needs to be installed on the Docker instance. The specific command to run inside the Docker instance is specific for the machine that is configured inside eMagiz Design & Deploy Architectures. It can be found inside the eMagiz iPaaS portal or is available upon request. Once that agent is installed, the image that is generated for every eMagiz release can be downloaded and installed in the Docker instance.
38 -
39 -=== 3.3 Cloud architecture for API Gateway ===
40 -
41 -[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-install-runtime-images.png]]
20 +{{info}}
21 +* Standard configuration to ensure that communication between your server and eMagiz to ensure communication.
22 + ** registry.emagiz.com:443
23 + ** controlplane.emagiz.com:8000
24 + ** Preferably the entry should be *.emagiz.com{{/info}}
42 42  
43 -== 4. Assignment ==
26 +===3.2 Installation Windows===
27 +Whenever Windows is selected as operating system, you need to have a Windows Server 2022 version or a 2019 version (> 1806). Older Windows servers are **not** supported.
44 44  
45 -Check out the cheatcheet for Docker command line:
46 -
47 -[[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
48 48  
49 -== 5. Key takeaways ==
30 +==== 3.2.1 Docker Installation ====
31 +In powershell with administrative rights, execute the following commands
50 50  
51 -* eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
52 -* eMagiz has a specific agent that manages the download of that image to the on-premises server
53 -* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
33 +{{code language="cmd"}}
34 +Invoke-WebRequest -UseBasicParsing "https://raw.githubusercontent.com/microsoft/Windows-Containers/Main/helpful_tools/Install-DockerCE/install-docker-ce.ps1" -o install-docker-ce.ps1
35 +.\install-docker-ce.ps1
36 +{{/code}}
54 54  
38 +==== 3.2.2 Check installation ====
55 55  
40 +After executing the commands above, the server will restart if required. After the restart, execute the following command
56 56  
57 -== 6. Suggested Additional Readings ==
42 +{{code language="cmd"}}
43 +docker ps
44 +{{/code}}
58 58  
59 -N/A
60 -
61 -== 7. Silent demonstration video ==
46 +If the command returns that the command cannot be found, please run the following command again.
62 62  
63 -N/A
48 +{{code language="cmd"}}
49 +.\install-docker-ce.ps1
50 +{{/code}}
64 64  
52 +==== 3.2.3 Verify docker functionality ====
53 +
54 +Execute the following command
55 +
56 +{{code language="cmd"}}
57 +docker ps
58 +{{/code}}
59 +
60 +The result of this call should show the following:
61 +
62 +[[image:Main.Images.Microlearning.WebHome@expert-solution-architecture-onpremises-server-windows-installguide--correct-result.png]]
63 +
64 +==== 3.2.4 Install eMagiz Deploy Agent ====
65 +
66 +Install the eMagiz Deploy agent as can be found in this [[microlearning>>doc:Main.eMagiz Academy.Microlearnings.Intermediate Level.eMagiz Runtime Management.intermediate-runtime-management-deploy-agent.WebHome||target="blank"]]
67 +
68 +== 4. Key takeaways ==
69 +
70 +* eMagiz uses runtime images to deploy emagiz runtime on dockerized environments. The runtime image holds all the information and components required to run the runtime
71 +* eMagiz has a specific agent that manages the download of that image to the on-premises server
72 +* The firewall of the on-premises environment should allow outgoing traffic without any restriction. In case that is not desirable, eMagiz can provide the addresses and ports needed to setup the right firewall rules.
73 +
74 +== 5. Suggested Additional Readings ==
75 +
76 +* Docker command line cheatsheet: [[image:Main.Images.Microlearning.WebHome@docker-cheatsheet.png]]
77 +
65 65  )))((({{toc/}}))){{/container}}{{/container}}